MFM – ручной FlangeMILL
Basic, simple and cost-effective solution for ID mount flange facing. It is a quick and easy way to reface a damaged flat, grooves in pipe flanges on site. Manual FlangeMill size and body is designed and built to allow quick and convenient processing of small flanges in awkward or dangerous locations.
Manual FlangeMil comes in two versions: regular and long, see tables below!
Working range for regular version
| Facing Range | Locking Range | Max V Tool Travel | Max H Tool Travel | Body Swing Diameter |
|---|---|---|---|---|
| 30 – 350 mm | 25,4 – 254,0 mm | 10 mm | 55 mm | 457,2 mm |
| 1,75″ – 14,00″ | 1″ – 10″ | 0,395″ | 2,165″ | 18″ |
| Drive | Body width | Body height | Body weight |
|---|---|---|---|
| Manual | 165 mm | 325 mm | 8,8 kg |
| Manual | 6,5″ | 12,8″ | 19,4 Lbs |
Working range long version
| Facing Range | Locking Range | Max V Tool Travel | Max H Tool Travel | Body Swing Diameter |
|---|---|---|---|---|
| 51 – 650 mm | 51 – 550 mm | 10 mm | 55 mm | 757 mm |
| 2,01″ – 25,60″ | 2,01″ – 21,65″ | 0,395″ | 2,165″ | 30″ |
| Drive | Body width | Body height | Body weight |
|---|---|---|---|
| Manual | 165 mm | 475 mm | 8,8 kg |
| Manual | 6,5″ | 18,7″ | 19,4 Lbs |
MFM tool bits and holder
Manual Flange Mill uses one just type of holders: MFMH-7-L and MFMH-7-R with carbide insert CI7 (screw MHS-2,7)
Manual FlangeMill advantages
MACHINING IN
EVERY POSITION
Manual FlangeMill can be freely rotated to work in every position. Remachining damaged flat, grooves and raised faced flanges on site is possible in every position.
EASE OF USE
The tool arm is rotated by hand using a worm-gear mechanism to provide a perfect spiral finish.
SMOOTH OPERATION
Quick adjustment handle to move the cutter to groove position.
PRECISE DEPTH ADJUSTMENT
The tool depth can be can be adjusted (10 mm stroke) thru spindle to define cut depth and the correct finish.
